![]() At that time, I had to repeat the process. Once fixed, everything continued to work until I rebooted into the Boot Camp partition. One time, I had to switch off the active user name. Sometimes it was enough to just switch off and switch back on the top boxes. In my particular case, I found that every time I did a boot into Boot Camp, I had to go switch things on and off under the Sharing option button as described above. The site offers suggestions on potential problems with firewalls and gives some additional simple steps to follow. ![]() If you still have a problem, I suggest you go to the following site:Ī/en-us/windows/forum/windows_7-networking/how-can-i-share-files-between-win-7-pro-and-a-mac/19759f30-a5cc-449d-b937-4f3e1fe591fe The problem only occurs when you boot in the Boot Camp partition. Parallels will not cause a problem, even if it is working off a Boot Camp partition. You will have to redo it every time you use Boot Camp. If you’ve successfully done sharing in the past and sharing went away after you opened Boot Camp and then went back to the Mac, the above procedure has a good chance of fixing your problem. Then click the Options button again and turn on the User Account again and the AFP and SMB sharing. Then click Done (which probably isn’t necessary). Then click off the box by the account name. If it doesn’t work, go back to the Mac and turn off both AFP and SMB again. Now try Network folder again on the Win7 machine. Wait a few seconds, and click them back on. Click off both the AFP box and the SMB box. On the Mac, do System Preferences > Sharing > Options Button. Close the Network folder (which may not be necessary). If you try the password and it isn’t recognized, your next move is the same as if the computer name wasn’t recognized. Just going in and out of Boot Camp can cause this to stop working. If you see the shared items, don’t assume that you will next time, particularly if you use Boot Camp. You’ll probably get one of three results: you’ll see the shared items from the Mac (if you’ve shared to Everyone on the Mac) you’ll see a message that says Windows doesn’t recognize the name or you’ll see a window to enter a password. (I know you shouldn’t have to do it, but sometimes it’s necessary.) Next, click the computer name to open it. If you don’t see the name of your Mac on the list, right click an empty space in the window, and choose Refresh. Now, with your Mac up and running, go to Computer > Network. One site (MS, believe it or not) said you should always assign a password, even if it is very short and simple. ![]() Each user should have the same password as the corresponding user name on the other computer. If, on the Mac, you don’t want to use the Everyone option, which can get around passwords, you should have the same set of users on both computers. That is the right foundation that you have to put in place. If you’re reading this, you should have first done the steps that Peter laid out above.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |